How to install a DHCP server on Ubuntu 6.06

Assumed that “eth0” is the interface for network card

IP Address Range: 192.168.0.100 to 192.168.0.200
Subnet Mask: 255.255.255.0
DNS Servers: 202.188.0.133, 202.188.1.5
Domains: tm.net.my
Gateway Address: 192.168.0.1
sudo apt-get install dhcp3-server
sudo cp /etc/default/dhcp3-server /etc/default/dhcp3-server_backup
gksudo gedit /etc/default/dhcp3-server
  • Find this line
...
INTERFACES=""
  • Replace with the following line
INTERFACES="eth0"
  • Save the edited file
sudo cp /etc/dhcp3/dhcpd.conf /etc/dhcp3/dhcpd.conf_backup
gksudo gedit /etc/dhcp3/dhcpd.conf
  • Find this section
...
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;  

default-lease-time 600;
max-lease-time 7200;
...
  • Replace with the following lines
# option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;  

#default-lease-time 600;
#max-lease-time 7200;
  • Find this section
...
# A slightly different configuration for an internal subnet.
#subnet 10.5.5.0 netmask 255.255.255.224 {
# range 10.5.5.26 10.5.5.30;
# option domain-name-servers ns1.internal.example.org;
# option domain-name "internal.example.org";
# option routers 10.5.5.1;
# option broadcast-address 10.5.5.31;
# default-lease-time 600;
# max-lease-time 7200;
#}
...
  • Replace with the following lines
# A slightly different configuration for an internal subnet.
subnet 192.168.0.0 netmask 255.255.255.0 {
 range 192.168.0.100 192.168.0.200;
 option domain-name-servers 202.188.0.133, 202.188.1.5;
 option domain-name "tm.net.my";
 option routers 192.168.0.1;
 option broadcast-address 192.168.0.255;
 default-lease-time 600;
 max-lease-time 7200;
}
  • Save the edited file
sudo /etc/init.d/dhcp3-server restart